Mounting your Anatkh Optics riflescope correctly is vital for long-range precision and accuracy. Follow these steps:
-
Preparation: Ensure your firearm is completely unloaded and safe. Select high-quality scope rings or a one-piece mount matching your Anatkh scope tube diameter (e.g., 30mm or 34mm) and Picatinny/Weaver rail.
-
Mounting the Base: Secure the scope base onto the rail. Apply recommended torque specs (typically 25–30 in-lbs) and use medium-strength thread locker (e.g., Blue Loctite 242).
-
Eye Relief Adjustment: Place your Anatkh Optics scope into the lower rings without tightening. Shoulder your rifle in a natural shooting position and slide the scope until you achieve a full, clear field of view with no vignetting or edge shadow.
-
Level the Reticle: Use a bubble level or plumb line to ensure the reticle is perfectly vertical to prevent canting errors downrange.
-
Torque the Rings: Tighten the ring screws evenly in a cross-pattern to 15–18 in-lbs. Avoid over-torquing to protect the premium optical tube of your Anatkh Optics scope.
0 comments